GALAX Announces HOF Pro M.2 PCIe 4.0 x4 SSD: Up to 5 GB/s

Feeder

RSS feed bot


GALAX has introduced its new flagship SSDs featuring a PCIe 4.0 x4 interface and sequential read performance of up to 5 GB/s. The new HOF Pro M.2 drives will demonstrate all of their advantages when installed inside systems based on AMD’s Ryzen 3000-series processors as well as AMD’s X570 based motherboards, as these are currently the only PCIe 4.0 compatible consumer hosts on the market.

Based on Phison’s PS5016-E16 controller (8 NAND channels with 32 CE targets with up to 800 MT/s speeds, 4th Gen LDPC ECC engine, 28nm, etc.) and Toshiba’s 3D TLC NAND memory, the GALAX Hall-of-Fame Pro SSDs are set to be available in 500 GB, 1 TB, and 2 TB capacities.


As far as sequential performance is concerned, the GALAX HOF Pro SSDs offer up to 5 GB/s read speeds as well as up to 4.4 GB/s write speeds, depending on the model and capacity. As for random performance, GALAX opted for firmware enabling up to 750K read IOPS as well as up to 700K write IOPS.


To ensure maximum performance, the GALAX HOF Pro SSDs are equipped with a large aluminum cooling system featuring a copper heat pipe. This cooling system naturally makes the drives incompatible with laptops, but since at present there are no notebooks based on AMD’s X570 platform, this is hardly a substantial drawback. Another important aspect about the new SSD is its white PCB, which will be appreciated by modders with white components.


To make the GALAX HOF Pro drives more appealing to enthusiasts, the manufacturer supplies it with Xtreme Tuner software for SSDs. The application monitors temperature, endurance, and other information about the drives to enable higher performance and reliability.

Specifications of the GALAX HOF Pro SSDs​
Model
500 GB​
1 TB​
2 TB​
Form Factor
M.2 2280​
Interface
NVMe, PCIe 4.0 x4​
Controller
Phison PS5016-E16​
NAND Flash
Toshiba BiCS4 3D TLC​
Capacities
500 GB​
1 TB​
2 TB​
Sequential Read (max)
5000 MB/s​
4900 MB/s​
5000 MB/s​
Sequential Write (max)
2500 MB/s​
4400 MB/s​
Random Read (max)
up to 750K IOPS​
Random Write (max)
up to 700K IOPS​
Warranty
? years​
Write Endurance
?​
?​
?​
TBW
?​
?​
?​
Release Date
July 2019​

The GALAX HOF Pro SSDs will be available in the coming weeks. Pricing will depend on the country, yet since we are talking about top-of-the-range drives, the cost will be likely accordingly high.


Related Reading:


Source: GALAX

Continue reading...
 
Top